What is RFID?
RFID(Radio frequency identification) is a generic term for technologies that use radio waves to automatically identify people or objects. There are several methods of identification, but the most common is to store a serial number that identifies a person or object, and perhaps other information, on a microchip that is attached to an antenna (the chip and the antenna together are called an RFID transponder or an RFID tag). The antenna enables the chip to transmit the identification information to a reader. The reader converts the radio waves reflected back from the RFID tag into digital information that can then be passed on to computers that can make use of it.
How does an RFID system work?
An RFID system consists of a tag made up of a microchip with an antenna, and an interrogator or reader with an antenna. The reader sends out electromagnetic waves. The tag antenna is tuned to receive these waves. A passive RFID tag draws power from the field created by the reader and uses it to power the microchip's circuits. The chip then modulates the waves that the tag sends back to the reader, which converts the new waves into digital data. For more information on the components of a complete system used in businesses, see Getting Started.
What's the difference between read-only and read-write RFID tags?
Microchips in RFID tags can be read-write, read-only or “write once, read many” (WORM). With read-write chips, you can add information to the tag or write over existing information when the tag is within range of a reader. Read-write tags usually have a serial number that can't be written over. Additional blocks of data can be used to store additional information about the items the tag is attached to (these can usually be locked to prevent overwriting of data). Read-only microchips have information stored on them during the manufacturing process. The information on such chips can never be changed. WORM tags can have a serial number written to them once, and that information cannot be overwritten later.
What is the read range for a typical RFID tag?
There really is no such thing as a "typical" RFID tag, and the read range of passive tags depends on many factors: the frequency of operation, the power of the reader, interference from other RF devices and so on. In general, low-frequency tags are read from a foot (0.33 meter) or less. High-frequency tags are read from about three feet (1 meter) and UHF tags are read from 10 to 20 feet. Where longer ranges are needed, such as for tracking railway cars, active tags use batteries to boost read ranges to 300 feet (100 meters) or more.
Copyright © OMT Smart Card Technology (HK) Co., Ltd. All Rights Reserved